- per page
Must have when replacing your engine stud ball or frame stud ball. These nylon seats go inside the clutch zbar shaft assembly and allow the ball to pivot smoothly. (each)
Must have when working on your clutch linkage. The clip is used to hold the engine stud ball and frame stud ball into the clutch zbar shaft.
This rubber boot inserts into the bell housing around the end of the clutch fork and keeps dirt and debris from entering into the bell housing.
Replace you Chevy or GMC Trucks torn or dry rotted Inner Clutch Push Rod Boot with this factory correct replacement.
This rubber boot inserts into the bell housing around the end of the clutch fork and keeps dirt and debris from entering into the bell housing.
This spring connects to the clutch fork and pulls back to apply pressure to the clutch fork, when you press in the clutch pedal the spring extends allowing the clutch to engage. When you release the clutch pedal the spring pulls the clutch fork back to a resting position.
- per page
