Windshield Seals

Products

  •  per page
1947-53 Chevy & GMC Truck One Piece Windshield Conversion Seal
Part#: 20168

This front windshield seal is designed for customers who have replaced the original two piece windshield design with our custom one piece windshield. The gasket removes the original vertical division found on original 47-53 Chevy & GMC Trucks windshield seals, but gives your new custom windshield a factory looking and secure seal.

Our price: $54.95
Market price: $79.95 save 31%
Quantity
Chevy & GMC Truck Weatherstrip Small Hook Tool with Ball
Part#: 20031
This tool is a must on removing or installing your windshield or rear window seal. The ball at the end of the hook helps serves as a non damaged hook tool to help in removal and installation of the locking strip and the rubber seal.
Our price: $8.95
Market price: $10.45 save 14%
Quantity
Chevy & GMC Truck Windshield & Rear Window Seal Chisel Stick
Part#: 20032
This is helpful tool to have when installing the glass into the seal without harming the seal or glass itself. The plastic material is hard enough help you along the edges of the seal and glass but soft enough to not damaged neither.
Our price: $1.95
Market price: $2.95 save 34%
Quantity
Chevy & GMC Truck Windshield & Rear Window Seal Locking Strip Tool
Part#: 20030

This is tool is essential to your success for installing your windshield or rear window seal. After you have the glass and the rubber installed in the designated area you'll have to install the lock strip trim. This Locking strip tool cuts your time in half.

Our price: $6.95
Market price: $8.50 save 18%
Quantity
1947-53 Chevy & GMC Truck Windshield Seal with Trim Channel
Part#: 17562

Every restoration should have had the front windshield seals replaced at some point. Reasons for changing the rubber seal is outside noise, moisture in the cab, and the most frequent problem is leaking into your cab which can damage a sizeable area. Simple fix to these certain problems are to replace your front windshield seals with a high quality rubber glass gasket that we offer. These seals are constructed to the original mold to give you a painless install and original look. Seal is for a 2 piece windshield and has a slot for the windshield molding.

Our price: $29.95
Market price: $34.95 save 14%
Quantity
1947-53 Chevy & GMC Truck Windshield Seal without Trim Channel
Part#: 17565

The front windshield seals are essential to replace when weathered and ruined from the elements and aging. The rubber seals are manufactured using the original model to keep the authentic look of the truck while sealing up your cab from outside elements and water leaks to preserve your classic truck. Weatherstrip is molded in one complete piece to fit the applications with a two glass windshield. For 2 piece windshield and without lockstrip channel.

Our price: $29.95
Market price: $34.95 save 14%
Quantity
1954-1955 Chevy & GMC Truck Windshield Seal with Trim Channel
Part#: 17569

Getting a new paint job or possibly your weatherstripping has deteriorated and cracked over the years? Well good news is we offer a quality rubber seal for your 1954 or 1955 GM truck that has been designed for a 1 piece windshield and a slot for the windshield molding. The rubber gasket will seal off all outside elements to preserve the front of your cab. Designed for a 1 piece windshield and accepts windshield molding.

Our price: $29.95
Market price: $34.95 save 14%
Quantity
1954-1955 Chevy & GMC Truck Windshield Seal without Trim Channel
Part#: 17568

Replacing the front windshield seals are necessary to completing a restoration. Over time the seals will become brittle and damaged allowing wind noise and water in the cab to possibly damage areas of your trucks cab. These seals are manufactured from a high quality rubber and molded to the original seals to give you a excellent fit along your windshield glass and cab opening. Sold for a 1 piece windshield and without the molding channel slot.

Our price: $29.95
Market price: $34.95 save 14%
Quantity
1955-59 Chevy & GMC Truck Windshield Seal with Trim Channel
Part#: 19626

Recently had a paint job done or possibly your seals have crumbled and cracked over time? Great news is that we offer a quality rubber gasket for your GM truck that has been designed for a windshield that accepts the windshield molding. The windshield seal will seal off all outside elements to preserve the front of your cab. Designed for a windshield that accepts windshield moldings.

Our price: $29.95
Market price: $34.95 save 14%
Quantity
1955-59 Chevy & GMC Truck Windshield Seal without Trim Channel
Part#: 17571

The front windshield gaskets are essential to replace when weathered and ruined from the elements and aging. The rubber seals are constructed using the original model to keep the authentic look of the truck while sealing up your cab from outside elements and water leaks to preserve your classic truck. Disigned for windshields without lockstrip channel.

Our price: $29.95
Market price: $34.95 save 14%
Quantity
  •  per page

Bestsellers

Chevy & GMC Truck Weatherstrip Small Hook Tool with Ball Chevy & GMC Truck Windshield & Rear Window Seal Locking Strip Tool 1947-53 Chevy & GMC Truck Windshield Seal with Trim Channel Chevy & GMC Truck Windshield & Rear Window Seal Chisel Stick 1954-1955 Chevy & GMC Truck Windshield Seal with Trim Channel
$8.95
$6.95
$29.95
$1.95
$29.95
 
1947-53 Chevy & GMC Truck Windshield Seal without Trim Channel 1955-59 Chevy & GMC Truck Windshield Seal with Trim Channel 1954-1955 Chevy & GMC Truck Windshield Seal without Trim Channel 1955-59 Chevy & GMC Truck Windshield Seal without Trim Channel 1947-53 Chevy & GMC Truck One Piece Windshield Conversion Seal
$29.95
$29.95
$29.95
$29.95
$54.95